Rubber Band Egg Drop. Submit a video of your egg drop, including a thumbnail image and a. While you're putting the sticks together, cut a rubber band apart and lock two pieces of it inside the sticks such that they make an x at the bottom of the sticks.
Alex Calder Intro to Technology The Egg Drop Project from alexcalder123.blogspot.com
They are conducting an egg drop. 7.rubber band the two together. The limitations are as follows.
It Should Look Like Figure 3 And 4 When You're Done.
The goal is to keep the raw egg intact, and minimize the impact on the egg encased in the contraption. 7.rubber band the two together. Note how far down the measuring stick the egg fell.
The Egg Housing Pyramid Take One Of Your Straws And Your Ruler And Carefully Measure 6 Centimeters Starting From The End Of The Straw With A Marker.
Submit a video of your egg drop, including a thumbnail image and a. Last week the thetau tau engineering fraternity held the annual egg drop competition. Third, i glued straws in the corner of the box.
8.Duct Tape The Metal Bars To The Styrofoam Cooler.
First, i glued stuffing on all sides of the inside of the box. * no drag inducers can be used in any way (parachutes, streamers, etc My final design included a small box, teddy bear stuffing, straws and a rubber band.
Arrange Popsicle (I'm Guessing All Of Them) Such That They Enclose The Egg, Aligned With The Axis Of The Egg.
The rubber print quality isn’t the greatest but with more. Another person will drop the egg from the top of the meter stick while the other group members note the number of centimeters the egg dropped. Keep holding the rubber band at this point while you drop the egg.
Finally, I Glued Stuffing On The Outside Of The Box Except For The Top An Closed It With A Rubber Band.
This design looked more difficult than the others, but it was by far the coolest looking. Paper plates, straws, balloons, rubber bands, paper cups, and/or tape. Add another rubber band, drop at least 3 times, and record the length of each drop.
